The grep utility shall search the input files, selecting lines
matching one or more patterns; the types of patterns are
controlled by the options specified. The patterns are specified by
the -e option, -f option, or the
pattern_list operand. The pattern_list’s value shall consist
of one or more patterns separated by <newline>s;
the pattern_file’s contents shall consist of one or more patterns
terminated by <newline>. By default, an input line
shall be selected if any pattern, treated as an entire basic regular
expression (BRE) as described in the Base Definitions volume
of IEEE Std 1003.1-2001, Section 9.3, Basic Regular Expressions,
matches any part of the line excluding the terminating <newline>;
a null BRE shall match every line. By default, each
selected input line shall be written to the standard output.
Regular expression matching shall be based on text lines. Since a
<newline> separates or terminates patterns (see the
-e and -f options below), regular expressions cannot contain
a <newline>. Similarly, since patterns are matched
against individual lines (excluding the terminating <newline>s) of
the input, there is no way for a pattern to match a
<newline> found in the input.
The grep utility shall conform to the Base Definitions volume
of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax Guidelines.
The following options shall be supported:
-E
Match using extended regular expressions. Treat each pattern specified
as an ERE, as described in the Base Definitions volume
of IEEE Std 1003.1-2001, Section 9.4, Extended Regular Expressions.
If any entire ERE pattern matches some part of an input line excluding
the terminating <newline>, the line shall be matched.
A null ERE shall match every line.
-F
Match using fixed strings. Treat each pattern specified as a string
instead of a regular expression. If an input line contains
any of the patterns as a contiguous sequence of bytes, the line shall
be matched. A null string shall match every line.
-c
Write only a count of selected lines to standard output.
-e pattern_list
Specify one or more patterns to be used during the search for input.
The application shall ensure that patterns in
pattern_list are separated by a <newline>. A null pattern can
be specified by two adjacent <newline>s in
pattern_list. Unless the -E or -F option is also
specified, each pattern shall be treated as a BRE, as
described in the Base Definitions volume of IEEE Std 1003.1-2001,
Section
9.3, Basic Regular Expressions. Multiple -e and -f options
shall be accepted by the grep utility. All of
the specified patterns shall be used when matching lines, but the
order of evaluation is unspecified.
-f pattern_file
Read one or more patterns from the file named by the pathname pattern_file.
Patterns in pattern_file shall be
terminated by a <newline>. A null pattern can be specified by an empty
line in pattern_file. Unless the -E or
-F option is also specified, each pattern shall be treated as
a BRE, as described in the Base Definitions volume of
IEEE Std 1003.1-2001, Section 9.3, Basic Regular Expressions.
-i
Perform pattern matching in searches without regard to case; see the
Base Definitions volume of IEEE Std 1003.1-2001,
Section 9.2, Regular Expression General Requirements.
-l
(The letter ell.) Write only the names of files containing selected
lines to standard output. Pathnames shall be written once
per file searched. If the standard input is searched, a pathname of
"(standard input)" shall be written, in the POSIX
locale. In other locales, "standard input" may be replaced by
something more appropriate in those locales.
-n
Precede each output line by its relative line number in the file,
each file starting at line 1. The line number counter shall
be reset for each file processed.
-q
Quiet. Nothing shall be written to the standard output, regardless
of matching lines. Exit with zero status if an input line is
selected.
-s
Suppress the error messages ordinarily written for nonexistent or
unreadable files. Other error messages shall not be
suppressed.
-v
Select lines not matching any of the specified patterns. If the -v
option is not specified, selected lines shall be
those that match any of the specified patterns.
-x
Consider only input lines that use all characters in the line excluding
the terminating <newline> to match an entire
fixed string or regular expression to be matching lines.
The following environment variables shall affect the execution of
grep:
LANG
Provide a default value for the internationalization variables that
are unset or null. (See the Base Definitions volume of
IEEE Std 1003.1-2001, Section 8.2, Internationalization Variables
for
the precedence of internationalization variables used to determine
the values of locale categories.)
LC_ALL
If set to a non-empty string value, override the values of all the
other internationalization variables.
LC_COLLATE
Determine the locale for the behavior of ranges, equivalence classes,
and multi-character collating elements within regular
expressions.
LC_CTYPE
Determine the locale for the interpretation of sequences of bytes
of text data as characters (for example, single-byte as
opposed to multi-byte characters in arguments and input files) and
the behavior of character classes within regular
expressions.
LC_MESSAGES
Determine the locale that should be used to affect the format and
contents of diagnostic messages written to standard
error.
NLSPATH
Determine the location of message catalogs for the processing of LC_MESSAGES
.
If the -q option is specified, the exit status shall be zero
if an input line is selected, even if an error was detected.
Otherwise, default actions shall be performed.
Care should be taken when using characters in pattern_list that
may also be meaningful to the command interpreter. It is
safest to enclose the entire pattern_list argument in single
quotes:
’...’
The -epattern_list option has the same effect as the
pattern_list operand, but is useful when
pattern_list begins with the hyphen delimiter. It is also useful
when it is more convenient to provide multiple patterns as
separate arguments.
Multiple -e and -f options are accepted and grep
uses all of the patterns it is given while matching input
text lines. (Note that the order of evaluation is not specified. If
an implementation finds a null string as a pattern, it is
allowed to use that pattern first, matching every line, and effectively
ignore any other patterns.)
The -q option provides a means of easily determining whether
or not a pattern (or string) exists in a group of files.
When searching several files, it provides a performance improvement
(because it can quit as soon as it finds the first match) and
requires less care by the user in choosing the set of files to supply
as arguments (because it exits zero if it finds a match even
if grep detected an access or read error on earlier file
operands).
This grep has been enhanced in an upwards-compatible way to
provide the exact functionality of the historical
egrep and fgrep commands as well. It was the clear intention
of the standard developers to consolidate the three
greps into a single command.
The old egrep and fgrep commands are likely to be supported
for many years to come as implementation extensions,
allowing historical applications to operate unmodified.
Historical implementations usually silently ignored all but one of
multiply-specified -e and -f options, but were
not consistent as to which specification was actually used.
The -b option was omitted from the OPTIONS section because block
numbers are implementation-defined.
The System V restriction on using - to mean standard input was
omitted.
A definition of action taken when given a null BRE or ERE is specified.
This is an error condition in some historical
implementations.
The -l option previously indicated that its use was undefined
when no files were explicitly named. This behavior was
historical and placed an unnecessary restriction on future implementations.
It has been removed.
The historical BSD grep-s option practice is easily duplicated
by redirecting standard output to
/dev/null. The -s option required here is from System
V.
The -x option, historically available only with fgrep,
is available here for all of the non-obsolescent
versions.
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of
Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document. The original Standard can be obtained online at
http://www.opengroup.org/unix/online.html .
IEEE/The Open Group
GREP (P)
2003
Generated by OpenAsthra.com from man1p/grep.1p using man macros.
